Licensing - Christie IMB User Manual

6. On the master projector touch panel controller (TPC), tap Menu > Christie IMB > System >
Multi Projector.
7. Tap Master IMB Enable.
8. Tap Active Dual Enabled if you are using an active 3D system and want to send left or right
images to multiple projectors. When you select this option, you cannot change the Master 3D
Eye Selection (step 9) or 3D Eye Selection (step 12) fields.
9. Select right or left eye for the master projector in the Master 3D Eye Selection list. This option
is not available when you select Active Dual Enabled.
10. Enter a description for the slave projector in the Description field.
11. Enter the IP address of the slave projector in the IP Address field.
12. Select right or left eye for the slave projector in the 3D Eye Selection field.
13. Repeat steps 10 to 12 for each additional slave projector.
14. Tap Save. If the Connected icon below Slave IMB Settings is not green, see
Connection Troubleshooting

Licensing

A license file is required to enable these features:
• 4K (108-444103-01)
• High Frame Rate (HFR) (108-445104-01)
• RealD 3D EQ
• Dolby 3D Color Correction
Only a single license file can be active at a time. If you have multiple licensed features, the license
keys are combined in a single license file. If you require multiple licenses, it is recommended that
you request them all at once.
Each license file is unique to a specific Christie IMB, and it is associated with the electronic serial
number (eSN) of the Christie IMB installed in the projector. After you receive the license file, you
must add it to the Christie IMB to enable functionality. See
4K and High Frame Rate Licensing
To enable 4K or high frame rate (HFR) support, you must purchase a license. To request a license,
contact Christie customer service. When you receive the license, you must install it. See
License Key on page 11.
RealD 3D EQ Licensing
If you have RealD equipment installed, there is no charge for a RealD 3D EQ license. The RealD 3D
EQ license is also referred to as ghostbusting.
Christie Integrated Media Block User Manual
020-100845-05 Rev. 1 (08-2013)
on page 95.
Hardware Installation and Setup
Upload a License Key
Set Up and
on page 11.
Upload a
9