Available Macro Actions; Add An Automation Device - Christie IMB User Manual

Manage Automation

Available Macro Actions

These are the macro actions that are available to control automated events:
Automation
Device
Playback
Projector
IMB Automation

Add an Automation Device

The Christie IMB has built-in support for the Christie ACT, Dolby CP650, Dolby CP750, and the Integ
JNIOR. You need to add and configure the device before you can run commands.
1. Tap Menu > Christie IMB > System.
2. Tap Automation > Devices.
3. Tap Add.
38
Activity Type
Playback
Projector
GPO Pulse
(not available on Solaria
+
One or Solaria One )
GPO Set
(not available on Solaria
+
One or Solaria One )
Delay
Serial String Output
Action
Pause
Resume
Stop
Toggle Pause Resume
Disable Subtitles
Douser open
Douser close
Lamp on
Lamp off
Standby mode
Channel change
Christie Integrated Media Block User Manual
Description
Pauses playback
Resumes playback
Stops playback
Pauses playback if content
is playing OR resumes
playback if content is
paused.
Disables subtitles for the
current content and
onward.
Opens the douser.
Closes the douser.
Strikes the lamp.
Turns the lamp off.
Puts the projector in
standby mode.
Selects a specific projector
channel.
Pulses the specified GPO
pin.
Sets the specified GPO pin
to high or low.
Delays macro execution.
Sends a serial string to an
IP address.
020-100845-05 Rev. 1 (08-2013)