Basic Editing ─ Creating A Contact And A Coil - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
*. Refer to Section 6.5.3 for more information about typing an instruction.
6.5.2 Basic Editing ─ Creating a Contact and a Coil
(1) Click
cursor changes to a contact when the mouse cursor is moved to the left, right, or bottom of the red frame.
Decide where to insert a contact. If you edit a ladder diagram, the mouse cursor must be near a position
you want to edit. The system automatically arranges an inserted object; you cannot move the object.
In this example, you do not need to decide where to insert the contact. Place the mouse cursor near the
red frame and click the left mouse button.
Icon Keyboard shortcut
Typing an instruction
Typing an instruction
Typing an instruction
Typing an instruction
Typing an instruction
Shift+Ctrl+U
on the toolbar, and then move the mouse cursor to the red frame in Network 1. The mouse
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Function
Inserts a coil
Inserts a comparison contact
Selects a type of comparison contact
Inserts a block logic instruction
(NP/PN/INV/FB_NP/FB_PN)
Selects a type of block logic instruction
(NP/PN/INV/FB_NP/FB_PN)
Inserts an instruction or a function block