Installation; Installing Modules In A Control Box - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com

4.3 Installation

4.3.1 Installing Modules in a Control Box

A PLC has to be installed in a closed control box. In order to ensure that the PLC radiates heat normally, the
space between the PLC and the control box must be larger than 50 millimeters.

AS200 / AS300
＞
50mm

AS100

Keep the PLC away from high-voltage equipment, high-voltage wires, and high-voltage motors.

In order to prevent the PLC from overheating, please do not install the PLC vertically on the bottom or top
of the control box.

Please install the PLC horizontally in the control box, as shown above.

If you intend to increase the number of modules, you must leave some space for installing the modules in
the control box.
>50mm
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
＞
50mm
＞
50mm
>50mm
>50mm
＞
50mm
>50mm