Wiring As-F2Da - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com

4.14.5 Wiring AS-F2DA

*1. Use shielded cables to isolate the analog input signal cable from other power cables.
*2. If noise in the input voltage results in noise interference in the wiring, Connect the module to a capacitor with
a capacitance between 0.1–0.47 μF with a working voltage of 25 V.
*3. Connect FE of the shielded cable to ground.
*4. CHX: Every channel can work with the input wiring shown above.
AC motor dri ve,
Vol tag e o utp ut
rec order,
*4
proportioning v alve 0V~+1 0V
CHX
*2
Shielde d ca ble*1
*3
F E
AC motor driv e,
*4
Cu rr en t o u tpu t
recorder,
CHX
propor tioning v al ve 4 mA~20 mA
Shie lded cable *1 *3
FE
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
VO1 CH1
IO1
COM
A G
VO2 CH2
IO2
COM
A G