Cautions - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
D.1 Cautions
Observe the following precautions before performing maintenance and inspection. Incorrect or careless operation
will lead to injury or equipment damage.

To prevent a breakdown of an AS Series system or a fire, ensure that the ambient environment
does not contain corrosive substances such as chloride gas, sulfide gas or flammable substances
such as oil mist, cutting powder, or dirt.

To prevent the connectors from oxidizing and to prevent electric shock, do not touch the
connectors.

To prevent electric shock, turn off the power before pulling the connectors or loosening the
screws.

To prevent cable damage, and to prevent the connectors from being loosened, do not put weight
on the cables or pull on them.

Ensure that the input voltage is within the rated range.

To prevent product breakdown, fire, or injury, do not disassemble or alter the modules.

To prevent a controlled element from malfunctioning, ensure that the program and parameters
are written into a new CPU module before restarting the AS Series system.

To prevent incorrect output or equipment damage, refer to the related manuals for more
information about operating the modules.

To prevent damage to the modules, touch grounded metal or wear an antistatic wrist strap to
release static electricity from your body before working on a module.

To prevent noise from causing system breakdown, keep a proper distance from the system when
using a cell phone or communication device.

Do not install an AS Series system in direct sun or in a humid environment.

To prevent the temperature of an element from being too high, maintain a proper distance
between the AS Series system and heat sources such as coils, heating devices, and resistors.

To protect an AS Series system, install an emergency stop switch and an overcurrent protection
device.

Inserting and pulling a module several times can loosen the contact between the module and the
backplane.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com