Installing And Removing A Wiring Module For As300 Plc Cpu - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
4.3.6

Installing and Removing a Wiring Module for AS300 PLC CPU

Put a communication cable in the port on a CPU module, and make sure the connector of the cable is properly
joined to the port.
 Installation
1.
One side of the wiring module has to be fixed first.
2.
Press the driver board in the direction indicated by arrow 1, and make sure the groove is
aligned with the DIN rail.
Removal

1. Push the wiring module in the direction indicated by arrow 1.
2. Pull the wiring module in the direction indicated by arrow 2.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com