Wiring As08Ad-B - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
*3. If noise in the input voltage results in noise interference in the wiring, connect the module to a capacitor with
a capacitance between 0.1–0.47 μF with a working voltage of 25 V.
*4. Connect FE of the shielded cable to ground.
*5. Connect the terminal
*6. Every channel can work with the wiring shown above.

4.9.2 Wiring AS08AD-B

4-w ir e: vol tage in put
-10 V~ + 10 V
+
+ 2 4V
-
0V
3-wi re: vo lt ag e inp ut
-10 V~ + 10 V
+ 2 4V
+
-
0V
*1. Use shielded cables to isolate the analog input signal cable from other power cables.
*2. If noise in the input voltage results in noise interference in the wiring, connect the module to a capacitor with
a capacitance between 0.1–0.47 μF with a working voltage of 25 V.
*3. Connect FE of the shielded cable to ground.
*4. Connect the terminal
*5. Every channel can work with the wiring shown above.
to ground.
*5
Shi eld ed c abl e *1
C H X
V 1+
*2
V1 -
*3
F E
Shi eld ed c abl e *1
*5
C H X
V 2+
V2 -
* 3
F E
* 4
0V
2 4 VD C
2 4V
to ground.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
A G
1 M
1 M
AG
1 M
1M
+ 1 5V
D C/ D C
C on ve rte r AG
-1 5V