Data Exchange - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
When AS-FECAT is installed on AS300 Series PLC CPU, you can use the INITEC instruction (API2820) to initialize
EtherCAT communication and then set up one of the AS-FECAT port as the EtherCAT Master's port in HWCONFIG.
As for the other port, it can be used by Server of Modbus TCP. Two ports work independently. If the EtherCAT
communication is NOT initialized, the two ports of AS-FECAT can be used by Servers of Modbus TCP.

8.2.16 Data Exchange

AS Series PLC CPU is equipped with the data exchange function through standard Modbus TCP. You can find the
relevant settings under the Data Exchange tab.
AS Series PLC CPU is built with two ports, two COM ports or one COM port and one Ethernet port varied by different
models. When acted as a Master and performs data exchange with a remote Slave, the data exchange through
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com