Setting The Parameters In An As Series Cpu Module; System Settings - System Information - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

8.2 Setting the Parameters in an AS Series CPU Module

8.2.1 System Settings – System Information
In the Edit Area, select the option System Settings and you can find two items, PLC Label and Comment under this
option. You can input up to 16 characters in the value field of PLC Label and 32 characters in the value field of
Comment. You can use all in the fields, including special characters and spaces. Note: One Chinese character
occupies two characters. characters
After the project is created, you can find the PLC label behind the product name in the project management area.
You can change the PLC label in HWCONFIG as it is mentioned above. The PLC label is very useful when you have
more than one PLC in the project. This label can be seen as the PLC identity. So that you will not change other PLC
parameters by mistake. To prevent errors, when you download/upload the program, the system will remind you to
check the name of the PLC CPU and the PLC label.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com