Delta AS Series Operation Manual page 150

Send Quote Requests to info@automatedpt.com
 The minimum requirements for an AS100 Series framework
Since AS100 Series PLC CPU does NOT require a power supply module, AS100 Series PLC CPU is all
you need to run a whole system.
Communication cable

Several communication interfaces are included in a CPU module, and many types of network modules are
available. You can select a suitable communication cable according to the actual situation.
The following table lists information about communication interfaces and main applications.
Interface
Communication
port
Ethernet
USB
Extension module

AS Series CPU module is equipped with standard communication ports, select suitable modules according
to the actual situation. Various kinds of modules can be purchased according to your needs. Refer to
section 1.1.2 for detailed information on the modules that can be used with your AS Series System.
 The limitations of setting up a standard AS PLC framework
The following lists the limits for setting up a standard framework of the AS PLC system. Exceeding any one
of the limits causes the PLC to send an error message.
Limit 1: You can connect up to 32 extension modules to the PLC, not including the power module, CPU
module, and remote module.
Limit 2: The maximum number of digital I/O points is 1024. The built-in digital I/O points of the CPU module
are included.
Connector
Five-pin removable Computer/HMI communication/Industrial control network
terminal block (2x RS-485)
Computer/HMI communication/Remote control/Data
RJ45
exchange/Industrial control network
Mini USB Computer communication
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Application