Installation Notes - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com

4.2 Installation Notes


To ensure you have sufficient installation space for AS Series System, before installation begins, be sure to
measure the size of your AS Series System and the size of the communication cable connectors and the
space between devices should also be taken into account.

Make sure that the work environment conforms to the specifications for the products. It is necessary to
consider the basic temperature/humidity control and dust/corrosion prevention.

Electromagnetic interference can result in system malfunction. Therefore, you must design the EMC
carefully. Refer to Appendix C in this manual for more information on EMC standards.

If components such as screws and washers are specified in the manual, do use components conforming to
the specifications.

If a cable is connected to a communication port, make sure the cable connector is properly joined to the
port on the module.

For the installation of DIN Rail, use a 35 mm wide rail or use the one that complies with EN 60715.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
35mm