Ethernet/Ip Tags - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com
9.4.6

EtherNet/IP Tags

EtherNet/IP Tag can be used for data transfer among different controllers. Create the tags from global symbols in
ISPSoft. And then you can use tags to communication with Delta HMI and the 3
the same EtherNet/IP network.

Tags can be further defined as Produced Tag and Consumed Tag.
1. Produced Tag: a tag that a controller makes available for other controller. Multiple controllers (EIP
scanner devices) can simultaneously consume (receive) the data. A produced tag sends its data to
consumed tags (consumers).
2. Consumed Tag: a tag that receives the data of a produced tag. The data type of the consumed tag and
the produced tag must be matched (including any array dimensions).

Before connecting to a Produced Tag, you should check the IP address and the names of the tags
(Produced Tag and Consumed Tag). One controller can have multiple Tags created, including produced
Tag and consumed Tag. See the example below:

The following Delta products support Tag function:
1. AS Series PLC CPU: V1.08.20 or later
2. ISPSoft software: V3.09 or later
3. DOPSoft software (Delta HMI editing software for DOP-100 series): V4.00.07 or later
Produ ced TAG 1
Produ ced TAG 2
Consumed TAG 1
Consumed TAG 2
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
rd
party devices while they are attached to
Produced TAG
Consumed TAG
Consumed TAG
Prod uced TAG
3rd party scanner device