R&S TSMA6 User Manual page 71

®
R&S TSMA6
To connect the R&S TSME6 and the R&S TSMExxDC with the R&S TSMA6, the fol-
lowing steps must be performed.
4 collar screws are part of the standard accessory of the R&S TSMA6. Additional collar
screws are part of the R&S TSME6/TSMExxDC accessory or can be ordered as spare
parts (R&S no. 4900.0804.00).
1. Screw the collar screws on the top of the R&S TSMA6 with a Torx 8 screw driver.
●
Figure 7-10: Collar screws
1 = 8 x Collar screws (R&S No.4900.0804.00)
2. Align the collar screws with the snap-in holes on the bottom of the R&S TSME6
and R&S TSMExxDC and press these devices down.
User Manual 4900.8057.02 ─ 11
Torque: 0.66 Nm ± 0.05 Nm
Measurement Setup
Vibration-proofed stacking
71