Verify Lan Settings (Internal Scanner Connection) - R&S TSMA6 User Manual

®
R&S TSMA6
7. Check in the "Info" tab, if any device is available.
●
●
8. Check the "Device Analysis Output".
●
●
9. Check the "Options" tab (see
●
●

11.8 Verify LAN settings (internal scanner connection)

1. Check the IP setting of the TSMA6 scanner connection.
Navigate to "Windows" > "Settings" > "Network & Internet" > "Network & Sharing
Center" > "Change Adapter Options".
The entry "TSMA6 Scanner Connection Int" must be available.
User Manual 4900.8057.02 ─ 11
If the R&S TSMA6 device is found, check the "Device Analysis Output".
If the R&S TSMA6 device is not found, contact the R&S support.
If there is an error, check if autofix is possible.
If autofix is possible => continue with
If autofix is not possible => contact R&S support.
If there is no error, continue with
If all required options are active, the scanner works correctly.
If necessary options are missing, contact R&S support.

Verify LAN settings (internal scanner connection)

step 9.
step 9
Figure 11-2).
Troubleshooting
135