Changing Ip Addresses; Changing Wlan Settings - R&S TSMA6 User Manual

®
R&S TSMA6
8. The remote desktop connection is established.
The R&S TSMA6 can be controlled from the remote PC.

6.2 Changing IP addresses

To change the IP addresses, refer to the following.
●
Chapter A.2.2.4,
●
Chapter A.2.2.5, "LAN

6.3 Changing WLAN settings

To change the WLAN settings (WLAN mode and preferred band), proceed as follows.
To change WLAN mode and preferred band.
1. Start the web-GUI of the R&S TSMA6.
2. Navigate to "Configuration" > "Connectivity" > "WLAN".
3. Select the following settings according to your needs or back to the default set-
tings.
●
●
●
See also
User Manual 4900.8057.02 ─ 11
"LAN", on page 163
SCAN",
"Wireless Mode"
"Preferred band"
"Wireless Mode Ext"
"WLAN Settings"
on page 164
on page 162.
Configuring the R&S TSMA6
Changing WLAN settings
46