R&S TSMA6 User Manual page 139

®
R&S TSMA6
Type in the command-line window ping <IP address of the remote port
of the R&S TSMA6 (LAN)> and wait for the answer.
If the R&S TSMA6 does not answer, contact the system administrator or the R&S
support.
Example:
C:\>ping 192.167.0.10
Pinging 192.167.0.10 with 32 bytes of data:
Reply from 192.167.0.10: bytes=32 time<1ms TTL=128
Reply from 192.167.0.10: bytes=32 time<1ms TTL=128
Reply from 192.167.0.10: bytes=32 time<1ms TTL=128
Reply from 192.167.0.10: bytes=32 time<1ms TTL=128
Ping statistics for 192.167.0.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Check R&S TSMA6 Network Connections
Check if the "TSMA6 LAN Connection" is available in the Windows network connec-
tions.
1. Connect keyboard, mouse and a monitor to the R&S TSMA6.
2. Navigate to "Windows" > "Settings" > "Network & Internet" > "Network & Sharing
Center" > "Change Adapter Settings".
3. The entry "TSMA6 LAN Connection" must be available.
Figure 11-6: TSMA6 LAN Connection
4. If the "TSMA6 LAN Connection" is not listed in the "Network Connections", a recov-
ery of the R&S TSMA6 is recommended (see
restore",
If the "TSMA6 LAN Connection" is listed in the "Network Connections" and the IP
address of the LAN port is still not displayed in the web GUI, contact R&S support.
User Manual 4900.8057.02 ─ 11
on page 122).
Troubleshooting
No remote access via LAN port
Chapter 10, "User backup and
139