Pairing Bluetooth ® Devices - R&S TSMA6 User Manual

®
R&S TSMA6
Import of SmartONE Expert workspace file
Importing of the R&S SmartONE Expert workspace file is an additional requirement for
operating in the "SmartONE Expert" mode.
1. Start the R&S TSMA6 web GUI (see
GUI",
2. Navigate to "File Transfer" menu and go to section "Upload File to TSMA".
3. Press the "Browse" button, select the desired ROMES workspace file on the
remote PC and click "Upload File".
4. The file is copied by default in the directory
C:\ProgramData\Rohde&Schwarz\My ROMES\Workspace.
Note: The target directory for file upload depends on the selected mode. The men-
tioned directory is only valid in ROMES mode.
6.6 Pairing Bluetooth
To pair the R&S TSMA6 with a remote device, the following steps must be performed.
For Bluetooth
GUI ("Home" > "Overview").
To change the operation mode, navigate to "Configuration" > "System" > "Mode" and
select an operation mode.
1. In the web-GUI, verify the Bluetooth
Figure 6-6: Bluetooth settings
2. Navigate to "Configuration" > "Connectivity" > "Bluetooth" and verify the settings:
User Manual 4900.8057.02 ─ 11
on page 43).
®
devices
®
preparation, the device must be in the "PC Mode". Check it via the web
Configuring the R&S TSMA6
Pairing Bluetooth
Chapter 6.1.1, "Using the R&S TSMA6 web
®
settings on R&S TSMA6.
®
devices
56