®
R&S
TSMA6
Battery
Press "Start" to write the battery info into the firmware log file.
Shutdown Settings
Configures the auto-power off behavior of the R&S TSMA6x.
Note: To support this mode, connect a R&S TSMA6 battery pack.
Auto Power Off ← Shutdown Settings
To enable auto power off, select "Auto Power Off" and enter the desired delay in sec-
onds. Press "Submit Timoe ut" to enable this feature.
The R&S TSMA6x with a connected battery pack unit will automatically power down
after the configured time delay when the DC power is removed from the R&S TSMA6
battery pack.
A.2.1.3
Speaker
The "Speaker" tab configures an acoustic warning signal.
Status
Volume........................................................................................................................ 159
Status (Speaker)
Activates or deactivates an acoustic warning signal.
Volume
Specifies the volume of the acoustic warning signal.
A.2.1.4
RF band
The "RF Band" tab allows to configure and recall the desired RF band for the scanner
if a limited band option is installed for the scanner.
Current
New
Current Configuration
Current valid band configuration
New Configuration
Selects a specific band.
A.2.1.5
Password
The "Password" tab allows to change the Windows password.
Change Instrument
User Manual 4900.8057.02 ─ 11
(Speaker)......................................................................................................... 159
Configuration..................................................................................................159
Configuration.......................................................................................................159
Password.....................................................................................160
└
Current
Password......................................................................................... 160
└
New
Password.............................................................................................. 160
└
Confirm New
Password................................................................................ 160
Web GUI reference
Configuration
159