Capture And Apply R&S Tsma6 Images - R&S TSMA6 User Manual

®
R&S TSMA6
6. In the "Installation Check", select "Don't Ask again" and "Continue".
Initial starting of SmartONE Standard (R&S SmartBenchmarker)
1. Start the web GUI.
2. Navigate to "Configuration" > "System" > "Mode".
3. As "Mode of Operation", select "SmartONE Standard".
For further details about using R&S SmartBenchmarker, refer to R&S SmartBench-
marker - Manual.
8.7 Capture and apply R&S TSMA6 images
Use the R&S TSMA6 image stick to capture and apply Windows images.
User Manual 4900.8057.02 ─ 11
Installing firmware and software updates
Capture and apply R&S TSMA6 images
114