Lan Scan - R&S TSMA6 User Manual

®
R&S TSMA6
LAN Connection
Specify the configuration details for the LAN connection.
State (LAN) ← LAN Connection
Displays the state of the LAN connection
connected | disconnected
R&S TSMA6TCP/IP Mode (LAN) ← LAN Connection
The IP address configuration can be switched between "DHCP" (receive IP address
from host) and static IP ("Static").
Enter the static IP configuration in the dialog below.
●
IP address
●
Subnet Mask
●
Default Gateway
●
DNS Server
It is possible to specify a primary and a secondary DNS server.
A.2.2.5

LAN SCAN

Configure the "LAN SCAN" port of the R&S TSMA6. This is the port marked with
"SCAN".
LAN Connection (LAN
LAN Connection (LAN SCAN)
Specify the configuration details for the additional Gbit LAN connection.
It is used to connect the R&S TSMA6B to a separate R&S TSME6 as a second scan-
ner used for MIMO scenarios and for increasing bandwidth and measurement rate.
State (LAN SCAN) ← LAN Connection (LAN SCAN)
Displays the state of the LAN SCAN connection
connected | disconnected
TCP/IP Mode (LAN SCAN) ← LAN Connection (LAN SCAN)
The IP address configuration in a client connection can be switched between "DHCP"
(receive IP address from host) and static IP ("Static").
Enter the static IP configuration in the dialog below.
●
IP address
●
Subnet Mask
●
Default Gateway
●
DNS Server
It is possible to specify a primary and a secondary DNS server.
User Manual 4900.8057.02 ─ 11
SCAN).....................................................................................164
└ State (LAN SCAN)........................................................................................ 164
└ TCP/IP Mode (LAN SCAN)........................................................................... 164
Web GUI reference
Configuration
164