Connecting Usb To Lan Adapter (Optional); Connecting Test Mobile Phones (Optional) - R&S TSMA6 User Manual

®
R&S TSMA6
2. Configure the LAN port IP address settings in the R&S TSMA6 web-GUI (see
Chapter A.2.2.4,
lines:
a) Local configuration, see
b) Remote configuration, see
3. Alternatively, use the assigned IP address for remote access (see
"IP
The default IP setting is "DHCP" (configure IP address automatically). The assigned IP
address for remote access when using DHCP is displayed in the web-GUI (see
ter A.1.2, "IP

3.1.11 Connecting USB to LAN adapter (optional)

To extend the available number of Gbit LAN ports, various optional USB to LAN adapt-
ers are available:
●
R&S TSPC-U2L (Single Gbit LAN port adapter)
●
R&S TSPC-U2L2 (Dual Gbit LAN port adapter )
●
R&S TSPC-U2L4 (USB-C to 4-port Ethernet)
For R&S TSPC-U2L4, no driver needs to be loaded. The firmware automatically config-
ures the port (see
For R& TSPC-U2L and R&S TSPCU2L2, check if driver updates are required.
For information how to connect an additional adapter, see
schwarz.com/driver/tsma6/.

3.1.12 Connecting test mobile phones (optional)

When you connect a test mobile phone to a USB port for the first time, the installation
of the appropriate drivers is mandatory.
Currently following driver is available.
●
Samsung USB driver
For information how to connect Qualcomm based mobiles and required driver updates,
see https://www.rohde-schwarz.com/driver/tsma6/.
To connect test mobile phones
► Connect test mobile phones to USB 3.0 / USB-C ports (see
User Manual 4900.8057.02 ─ 11
"LAN", on page 163) in accordance with your administrator guide-
on page 43.
smartphone", on page 44
settings", on page 154).
settings", on page 154').
Chapter A.2.2.6, "LAN EXT2 / EXT3 / EXT5 /
Chapter 6.1.1.1, "Using the web GUI
Chapter 6.1.1.2, "Using WLAN from a remote PC or
Getting started
Preparing for use
locally",
Chapter A.1.2,
Chap-
EXT6", on page 165).
https://www.rohde-
Figure 3-7 - 2, 14).
29