Mode; Power - R&S TSMA6 User Manual

®
R&S TSMA6
A.2.1.1

Mode

The "Mode" tab is used to configure and read back the selected mode of operation.
Mode of
Current
Mode of Operation
Set of radio buttons for all supported modes of operation. The desired measurement
mode is selected and activated by pressing "Submit". The selected mode is automati-
cally started after each power up as long as not reconfigured by the user.
In "PC Mode", no active measurement is selected in autostart.
Current Measurement
Status information and action buttons for the selected mode of operation.
A.2.1.2

Power

The "Power" tab displays all settings related to the power on/power off scenarios.
Startup
Delayed System
Sleep Mode
Battery.........................................................................................................................159
Shutdown
Startup Settings
Configures different startup sequences.
Auto Power ON ← Startup Settings
The device is starting automatically when DC power is available at the DC IN connec-
tor or at the docking connector for the battery pack unit.
Remember Last State ← Startup Settings
When the device was powered down in the previous measurement session, then the
device will keep this state when DC power is applied again.
Delayed System Start
Note: To support this mode, connect a R&S TSMA6 battery pack.
The delay time is configured at the R&S TSMA6x. After pressing "Activate" and "Shut-
down", the device enters sleep mode and starts after the configured delay. The sleep
mode is indicated with a green blinking "Mode" LED.
Sleep Mode Settings
Note: To support this mode, connect a R&S TSMA6 battery pack.
If activated, the device enters sleep mode after power down. The CPU LAN port
remains powered to access the device via Intel ATM.
User Manual 4900.8057.02 ─ 11
Operation...................................................................................................... 158
Measurement................................................................................................. 158
Settings...........................................................................................................158
└ Auto Power ON............................................................................................. 158
└ Remember Last State................................................................................... 158
Start................................................................................................. 158
Settings................................................................................................... 158
Settings...................................................................................................... 159
└ Auto Power Off..............................................................................................159
Web GUI reference
Configuration
158