No Rf / Gps Data - R&S TSMA6 User Manual
Autonomous mobile network scanner
Hide thumbs
Also See for TSMA6:
- User manual (155 pages) ,
- Getting started (51 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
®
R&S
TSMA6
If you need to transport or ship the product, see
on page 149.
11.15 No RF / GPS data
1. Check if the RF antenna is connected to the RF port.
Figure 11-8: RF antenna connector
1 = RF port
2. Check if the GPS antenna is connected to GPS antenna input.
Figure 11-9: GPS antenna connector
1 = GPS antenna connector
Note: Only use the GPS antenna included in the scope of delivery.
3. Check if the LEDs indicate an error (see
on page 125).
4. Open the web GUI (Internet Explorer, URL: http://localhost) and change the "Mode
of Operation" to "PC Mode".
5. Start the "TSME Device Manager" via the Windows "Start" menu.
"Start > All Programs > TsmeTools > TsmeDeviceManager"
Check if there are any error messages in the "TSME Device Manager".
●
User Manual 4900.8057.02 ─ 11
If errors are reported in the "Device Analysis Output" window, follow the instruc-
tions.
Chapter 12,
"Transporting",
Chapter 11.1, "LED indicated
Troubleshooting
No RF / GPS data
errors",
147
Advertisement
Table of Contents
