Evaluate Selftest File; Access The Firmware Log File; Write Battery Info Into Firmware Log File - R&S TSMA6 User Manual

®
R&S TSMA6

11.2 Evaluate selftest file

●
Path: C:\ProgramData\Rohde-Schwarz\TSMA\Selftestresults
●
Filename: Selftestresult.txt
Entries in the Selftestresult.txt are created during the boot process of the
device and every 5 minutes.
To open the Selftestresult.txt, proceed as follows.
1. Open a file explorer.
2. Enter the path to the directory where the selftest file is stored.
3. Open the selftest file.
Following device parameters and values are stored.
●
Internal voltages (nominal values / actual values)
●
Temperatures (scanner / mainboard)
●
Battery status info
●
Status of fans
●
Status of scanner interface

11.3 Access the firmware log file

The firmware log file is created once per day. A maximum of 15 files are available for
download (see
To check the log file entries
1. Navigate to "File Transfer" > "App Log".
2. Under "Firmware Log Trace", you see the content of the current log file.
To download a log file
1. Navigate to "File Transfer" > "App Log".
2. Under "Firmware Log File", select the log file according to your needs.
The log files have the following format: Log_yyyy-mm-dd.txt.

11.4 Write battery info into firmware log file

As an option, you can write the battery info additionally into the firmware log file (see
"Battery"
User Manual 4900.8057.02 ─ 11
"App Log" on page 166).
on page 159.
Troubleshooting

Write battery info into firmware log file

126