6
RECORDER MODULE (DETAILED
SPECIFICATIONS)
This chapter explains the function details, module labels, input/output signals, and buffer memory of a recorder module.
6.1
Function Details
This section shows the details on the functions of a recorder module.
Recording function
This function can be used to accumulate devices and labels sampled by a CPU module, and output them and the event
history of the CPU module to a recording file and save the file to an SD memory card when a file saving trigger is satisfied.
For details, refer to the following:
Page 14 Recording Function
SD memory card format function
This function can be used to format an SD memory card inserted in a recorder module.
The procedure is as follows:
Operating procedure
1.
Check that 'Recording function operation status' (X3) is 'stopped.'
2.
If it is 'operating,' switch it to 'stopped' by either of the following operations:
• Switch a CPU module from RUN to STOP.
• Stop the operation of the recording function in the "Recording Monitor" screen. (Page 65 RECORDING MONITOR)
3.
Use GX Works3 to format an SD memory card.
Page 76 SD memory card operation
After formatting, the volume label will be RD81RC96.
Self-diagnostic function
This function is an internal function to check the hardware health of a recorder module and diagnose whether the module
operates properly.
There are two main functions for the self-diagnostic function.
• Automatic hardware test (Page 77 Automatic hardware test)
• Hardware test for LED check (Page 78 Hardware test for LED check)
6 RECORDER MODULE (DETAILED SPECIFICATIONS)
88
6.1 Function Details