Mitsubishi Electric MELSERVO-MR-J4 GF Series Instruction Manual page 266

Index Sub Name and function
Index
2C2E 0 Vibration based fault prediction
prepare status
The threshold creation progress
used for vibration failure
prediction is displayed in %. The
creation of a threshold for
vibration failure prediction will be
completed at 100%.
2C2F 0 Motor total distance
The motor total travel distance is
displayed in units of rev or m.
2D01 0 Control DI 1 to Control DI 10
to The on/off status of input device
2D0A can be read. The on/off status of
input device can also be set.
2D11 0 Status DO 1 to Status DO 10
to The on/off status of output device
2D1A can be read.
2D20 0 Velocity limit value
The speed limit value is set.
2D28 0 Motor rated speed
The servo motor rated speed is
returned.
2D30 0 Manufacturer Device Name 2
The number of characters (32) of
the model name of the servo
amplifier is returned.
1 to 32 Manufacturer Device Name 2
The model name of the servo
amplifier is returned.
2D32 0 Manufacturer Software Version 2
The number of characters (3) of
the software version of the servo
amplifier is returned.
1 to 3 Manufacturer Software Version 2
The software version of the servo
amplifier is returned.
2D33 0 Serial Number 2
The number of digits (16) of the
serial number of the servo
amplifier is returned.
1 to 16 Serial Number 2
The serial number of the servo
amplifier is returned.
10 OBJECT DICTIONARY
264
10.1 Object dictionary list
Data Access Variable
Type mapping
I16 ro Impossible
I32 ro Impossible
U16 rw Possible
U16 ro Possible
U32 rw Possible
U32 ro Impossible
VISIBLE ro Impossible
STRING
VISIBLE ro Impossible
STRING
VISIBLE ro Impossible
STRING
Default Range Units
 8000h to %
7FFFh
 80000000h to rev
7FFFFFFFh m
0 0000h to
FFFFh
 
0000h to
FFFFh
50000 00000000h to 0.01 r/
instantaneous min
permissible 0.01
speed mm/s

00000000h to r/min
FFFFFFFFh mm/s
  
  
  
EEP- Parameter
ROM
 
 
 
 

PT67
 
 
 
 