Operation In Combination With The Simple Cam - Mitsubishi Electric MELSERVO-MR-J4 GF Series Instruction Manual

Operation in combination with the simple cam

Encoder following function
The servo amplifier receives A/B-phase output signal from a synchronous encoder and starts the servo motor with the signal.
Up to 4 Mpulses/s can be inputted from the synchronous encoder to use with the servo amplifier.
Servo amplifier
MR-J4-GF-RJ
A/B-phase output
Synchronous encoder
Simple cam position compensation function
The servo amplifier receives input signals from the touch probe, calculates compensation, and compensates the position of
the cam axis.
2) Calculates a
compensation
amount in the
servo amplifier
A/B-phase
output
Synchronous encoder
Cam axis
Servo motor for
driving the cam axis
Servo amplifier
MR-J4-GF-RJ
1) Turns on the cam position
compensation request by detection
of touch probe
Touch probe
Cam axis
Servo motor for
driving the cam axis
9 MANUFACTURER FUNCTIONS
9.5 Simple cam function
9
213