4�9�2� Secondary Voltage; 4�9�3� Primary Current - Circutor CVM-C10 Instruction Manual

4�9�2� SECONDARY VOLTAGE
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values.
If you press the
modify the previously programmed values again.
To validate the data, press
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Maximum programming value: 999.
Minimum programming value: 1.
Press key
4�9�3� PRIMARY CURRENT
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the remaining values.
If you press the
modify the previously programmed values again.
To validate the data, press
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Maximum programming value: 10000.
Minimum programming value: 1.
48
On this screen the voltage transformer secondary is programmed.
Press key
The prog icon will be displayed on the bottom of the screen.
To enter or modify the value, press the
the value of the flashing digit.
key after changing the last digit, it will jump back to the first digit so you can
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
The current transformer primary is programmed on this screen.
Press key
prog icon will be displayed on the bottom of the screen.
To enter or modify the value, press the
the value of the flashing digit.
key after changing the last digit, it will jump back to the first digit so you can
for 3 seconds and the prog icon will disappear from the display.
for 3 seconds to edit the transformer secondary value.
for 3 seconds to edit the transformer primary value. The
CVM-C10
key repeatedly, increasing
key repeatedly, increasing
Instruction Manual
to
to