Circutor CVM-C10 Instruction Manual page 69

CVM-C10
4�9�29�2 BACnet protocol
Note: Protocol available in devices with version 3.00 or higher.
 Transmission speed
To validate the data, press
Press key to access the next programming step.
 Device ID
When the desired value is shown on the screen, press the
the other values.
If you press the key after changing the last digit, it will jump back to the first digit so you can
modify the previously programmed values again.
Maximum programming value: 999999.
Minimum programming value: 0.
To validate the data, press
Press key to access the next programming step.
 MAC
Instruction Manual
The transmission speed of BACnet communications is programmed on
this screen.
Press key for 3 seconds to edit the transmission speed selection.
The prog icon will be displayed on the bottom of the screen.
to browse the two options: 9600 or 19200.
Press key
for 3 seconds and the prog icon will disappear from the display.
The device ID is programmed on this screen.
Press the key for 3 seconds to edit the value. The prog icon will
be displayed on the bottom of the screen.
To enter or modify the value, press the
the value of the flashing digit.
for 3 seconds and the prog icon will disappear from the display.
The MAC address is programmed on this screen.
Press the key for 3 seconds to edit the value. The prog icon will
be displayed on the bottom of the screen.
To enter or modify the value, press the
the value of the flashing digit.
key repeatedly, increasing
key to go to the next digit and modify
key repeatedly, increasing
69