4�9�26� Programming Alarm 4 (Digital Output T2); 4�9�27� Operating Mode Of Digital Input 1; 4�9�28� Operating Mode Of Digital Input 2 - Circutor CVM-C10 Instruction Manual

Maximum programming value: 500 ms.
Minimum programming value: 30 ms.
4�9�26� PROGRAMMING ALARM 4 (DIGITAL OUTPUT T2)
Note: Configuration parameters not available for the CVM-C10-FLEX, CVM-C10-ITF-IN and CVM-C10-
MC-IN models.
4�9�27� OPERATING MODE OF DIGITAL INPUT 1
To validate the data, press
Press key
4�9�28� OPERATING MODE OF DIGITAL INPUT 2
To validate the data, press
Press key
66
All values for digital output T2 are programmed on this screen.
They are programmed as in the case of digital output T1, see
Programming alarm 3 (Digital output T1)"
The function of digital input 1 is selected on this screen.
Press key
icon will be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
The function of digital input 2 is selected on this screen.
Press key
icon will be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
for 3 seconds to edit the function selection. The prog
to browse the two options:
Logic input
Tariff selection.
for 3 seconds to edit the function selection. The prog
to browse the two options:
Logic input
Tariff selection.
CVM-C10
"4.9.25.
Instruction Manual