4�9�6� Secundary Neutral Current (Model Cvm-C10-Itf-In); 4�9�7� Number Of Quadrants; 4�9�8� Measurement Convention - Circutor CVM-C10 Instruction Manual

4�9�6� SECUNDARY NEUTRAL CURRENT (MODEL CVM-C10-ITF-IN)
To validate the data, press
Press key
4�9�7� NUMBER OF QUADRANTS
To validate the data, press
Press key
4�9�8� MEASUREMENT CONVENTION
The key
Cir Circutor measurement convention.
IEC IEC measurement convention.
IEEE IEEE measurement convention.
To validate the data, press
50
The neutral current transformer secundary is programmed on this
screen.
Press key
The prog icon will be displayed on the bottom of the screen.
Press key
transformer secondary (1A or 5A).
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step
The quadrant number on which the unit takes the measurement is
selected on this screen.
Press key
prog icon will be displayed on the bottom of the screen.
Press key
2 or 4 quadrants.
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step
You can select the measurement convention of the device from this
screen.
To edit the measurement convention press key
prog icon will be displayed on the bottom of the screen.
is used to browse the different options:
for 3 seconds and the prog icon will disappear from the display.
for 3 seconds to edit the transformer secundary value.
to browse the two possible options for the current
for 3 seconds to edit the number of quadrants. The
to browse the two options:
CVM-C10
for 3 seconds. The
Instruction Manual