4�9�30� Locking The Programming - Circutor CVM-C10 Instruction Manual

When the desired value is shown on the screen, press the
the other values.
If you press the
modify the previously programmed values again.
Maximum programming value: 255.
Minimum programming value: 0.
To validate the data, press
Press key
4�9�30� LOCKING THE PROGRAMMING
When you enter the programming menu you can view and modify the programming. Icon
display indicates the permanently locked status.
When you enter the programming you can view the programming but not modify it. Icon
the locking status. Enter the password to modify the programming values.
To validate the data, press
Press the
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values.
If you press the
modify the previously programmed values again.
70
key after changing the last digit, it will jump back to the first digit so you can
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
This screen is for protecting the data configured in the programming
menu.
Press key
The prog icon will be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
key to enter the password for locking and unlocking the programming:
On this screen you enter the password for locking and unlocking the
programming.
Press key
icon will be displayed on the bottom of the screen.
To enter or modify the value, press the
the value of the flashing digit.
key after changing the last digit, it will jump back to the first digit so you can
key to go to the next digit and modify
for 3 seconds to edit the locking/unlocking selection.
to browse the two options:
for 3 seconds to edit the password selection. The prog
CVM-C10
on the
indicates
key repeatedly, increasing
Instruction Manual
to