6�1�- Measurement Configuration; 6�1�1�- Primary And Secondary Voltage - Circutor Line-CVM-D32 Instruction Manual

If expansion modules are connected to the device, after configuring digital output 2, module
configuration is accessed, see the Expansion Module Instruction Manual for correct module
configuration (M239B01-03-xxx).
The device configuration menu is protected by password; when accessing configuration of one of the
device's parameters for the first time, the password screen is displayed,
Use keys
Press key
Hold down key
Default password: 97531.
Note: The password can be modified, see
Note: In
"ANNEX A.- CONFIGURATION MENU"
6�1�- MEASUREMENT CONFIGURATION
6�1�1�- PRIMARY AND SECONDARY VOLTAGE
This screen enables Primary and Secondary Voltage value configuration.
Hold down key
Hold down key
Use keys
Press key
Hold down key
44
and to modify the digit's value.
to skip through the digits.
to validate the value.
to set the Primary Voltage
to set the Secondary Voltage
and to modify the digit's value.
to skip through the digits.
to validate the value.
ENTER PASSWORD:
*****
SETUP
Figure 30: Configuration password�
"6.1.9.- DISPLAY BACKLIGHT AND PASSWORD".
, the entire configuration tree is displayed.
PRIMARY VT
1.0
V
SECONDARY VT
1.00
V
SETUP MEASURE
(PRIMARY VT).
(SECONDARY VT).
line-CVM-D32
.
Figure 30
Instruction Manual