4�9�11� Deleting Maximum Demand; 4�9�12� Selecting The Operation Profile - Circutor CVM-C10 Instruction Manual

Note: Programming the value 0 disables the calculation of the maximum demand.
Press key
4�9�11� DELETING MAXIMUM DEMAND
To validate the data, press
Press key
4�9�12� SELECTING THE OPERATION PROFILE
To validate the data, press
Press key
 Selecting the screens that will be displayed (User profile)
The following screen is displayed if you have selected the user profile:
Press key
52
to access the next programming step.
On this screen you select whether or not to delete the maximum
demand.
Press key
icon will be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step
The unit's operation profile is selected on this screen.
Press key
prog icon will be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step
This screen is used to select whether the unit's display screens are
defined by the user or not.
Press key
be displayed on the bottom of the screen.
to browse the two profile options:
for 3 seconds to edit the deletion selection. The prog
to browse the two deletion options: Yes or No.
for 3 seconds to edit the operation profile selection. The
to browse the three profile options:
Analyzer profile, analyzer,
Electrical energy efficiency profile, e
User profile, user,
for 3 seconds to edit the selection. The prog icon will
CVM-C10
,
3
Instruction Manual