Circutor CVM-C10 Instruction Manual page 68

To validate the data, press
Press key
Parity

To validate the data, press
Press key
Number of data bits

To validate the data, press
Press key
Number of Stop bits

To validate the data, press
Press key
68
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
The type of parity of Modbus communications is selected on this
screen.
Press key
icon will be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
The number of data bits of Modbus communications are programmed
on this screen.
Press key
icon will be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
The number of Stop bits of Modbus communications are programmed
on this screen.
Press key
The prog icon will be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
for 3 seconds to edit the parity type selection. The prog
to browse the options:
no parity
even parity.
odd parity.
for 3 seconds to edit the bit number selection. The prog
to browse the two options: 7 or 8 bits.
for 3 seconds to edit the Stop bits number selection.
to browse the options: 1 or 2 bits.
CVM-C10
Instruction Manual