4�9�14� Selecting The Cos Φ - Pf Bar On The Display; 4�9�15� Deleting Maximum And Minimum Values; 4�9�16� Deleting Energy Values - Circutor CVM-C10 Instruction Manual

To validate the data, press
Maximum programming value: 99 seconds.
Minimum programming value: 0 seconds.
Note: The value 00 indicates that the backlight will stay permanently lit.
Press key
4�9�14� SELECTING THE Cos
To validate the data, press
Press key
4�9�15� DELETING MAXIMUM AND MINIMUM VALUES
To validate the data, press
Press key
4�9�16� DELETING ENERGY VALUES
54
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
BAR ON THE DISPLAY
φ - PF
This screen is used to select the Cos
Press key
be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
On this screen you select whether or not to delete the maximum and
minimum values
Press key
be displayed on the bottom of the screen.
Press key
for 3 seconds and the prog icon will disappear from the display.
to access the next programming step.
On this screen you select whether or not to delete the energy values
Press key
be displayed on the bottom of the screen.
Press key
for 3 seconds to edit the selection. The prog icon will
to browse the two viewing options.
Displaying the Cos φ.
Displaying the Power Factor
for 3 seconds to edit the selection. The prog icon will
to browse the two options (Yes and No).
for 3 seconds to edit the selection. The prog icon will
to browse the two options (Yes and No).
φ - PF bar viewing option.
Instruction Manual
CVM-C10