4�9�13� Backlight, Turning On The Backlit Display - Circutor CVM-C10 Instruction Manual

CVM-C10
the display screens are those that were stored in previous programming settings of the
device. (In the case of new devices, these will be the same as those of the analyzer profile)
, the display screens are selected.
To validate the data, press
Press key to access the next programming step
 Selecting the screens
The following screen will be displayed if you have selected
Press key to browse the two options:
, to display the screen in the user menu.
, to stop displaying the screen.
To validate the data, press
Press key to access the next programming step
This programming step is repeated for each one of the 18 screens of the device.
4�9�13� BACKLIGHT, TURNING ON THE BACKLIT DISPLAY
To enter or modify the value, press the
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values.
If you press the key after changing the last digit, it will jump back to the first digit so you can
modify the previously programmed values again.
Instruction Manual
for 3 seconds and the prog icon will disappear from the display.
This screen displays the first screen of the analyzer profile, Phase-
phase Voltage and the user profile viewing option can be selected.
for 3 seconds to edit the selection. The prog icon will
Press key
be displayed on the bottom of the screen.
for 3 seconds and the prog icon will disappear from the display.
The time that the Backlight will stay lit (in seconds) is programmed on
this screen after the last keystroke on the unit .
Press key for 3 seconds to edit the backlight value. The prog icon
will be displayed on the bottom of the screen.
key repeatedly, increasing the value of the flashing digit.
:
to
53