Table of Contents
Advertisement
CVM-C10
If you press the
key after changing the last digit, it will jump back to the first digit so you can
modify the previously programmed values again.
Press key
to browse the different tariffs.
To validate the data, press
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Maximum programming value: 1.9999.
Minimum programming value: 0.
Press key
to access the next programming step.
4�9�21� COST RATIO OF GENERATED ENERGY
When the desired value is shown on the screen, move onto the next digit by pressing the key
modify the other values.
If you press the
key after changing the last digit, it will jump back to the first digit so you can
modify the previously programmed values again.
Press key
to browse the different tariffs.
To validate the data, press
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Maximum programming value: 1.9999.
Minimum programming value: 0.
Press key
to access the next programming step.
Instruction Manual
for 3 seconds and the prog icon will disappear from the display.
The cost per kWh of electricity of the three tariffs of the unit is
calculated on this screen.
Press key
for 3 seconds to edit the cost ratio selection. The prog
icon will be displayed on the bottom of the screen.
To enter or modify the value, press the
the value of the flashing digit.
for 3 seconds and the prog icon will disappear from the display.
key repeatedly, increasing
to
57
Advertisement
Table of Contents
Need help?
Do you have a question about the CVM-C10 and is the answer not in the manual?
Questions and answers