5-12 Technical Settings - Saadat Respina P1 User Manual


O2 Sensor
Select this item to set On/Off the oxygen sensor.
Note:
If you set the O2 sensor to off, "High Oxygen" and "Low Oxygen" alarms will be disabled
and the measured value of O2 parameter will not be displayed.

EXH Flow Sensor
Select this item to set On/Off the exhalation flow sensor.
Note:
If you set the EXH flow sensor to off, "High Vte", "Low Vte", "Low MV", "High MV" and
"High Leak" alarms will be disabled and measured value of following parameters will not be
displayed: Vte, MV, MV spont, PFe, Leak, Rexp, RCe

5-12 Technical settings

Select Technical from Config menu and enter password in the below page. A menu will
appear to perform special settings of the device by the manufacturer authorized experts. One
of the settings that the user can make in this menu is to set the time and date of the device.
It is possible to enter the password by touch screen and rotary knob.
Figure 5-16 Technical menu
41