Calibration; Settings - Saadat Respina P1 User Manual

5-3

Calibration

Select this item to access calibration menu. For more information about this menu, please
refer to section 7 of this manual.
5-4

Settings

After entering patient data, the device will load default settings automatically. Then user
should select ventilation mode and other parameters settings and confirm the selected mode.
After confirming the settings, the patient ventilation will start.
Select a mode from Modes menu and press Accept button. After selecting mode, set relevant
parameters to the selected mode and press ACTIVATE. Available ventilation modes are:
PCV, VCV, PRVC-CMV
P-SIMV, V-SIMV, PRVC-SIMV
PSV, VSV, APRV
The below parameters could be set by the ventilator:
Parameter
O Percent of delivered oxygen to patient
2
Rate Number of mandatory breaths in the minute.
Figure 5-6 the Ventilator Settings menu
Description
30