Table of Contents
Advertisement
Default setting of time scale in all pressure-time, volume-time and flow-time curves is (0,12).
The user can change default setting to one of above ranges. Changing the time scale of one
curve makes the same change to the other curves.
Flow, pressure and volume values may exceed the selected scale by some changes in
parameters of the current ventilation mode.
When the scale of a curve is changed, the same change is made in corresponding loop. If the
numerical value of the curve exceeds the display window, the curve is displayed as a dot.
Freezing the screen
It is possible to freeze the curves simultaneously by touching the "Freeze" icon. In this
situation, it is changed to unfreeze. User can resume the curves by touching "Unfreeze" icon.
Pay attention that loops are not freeze when user freezes the curves.
91
Advertisement
Table of Contents
