Monitoring - Saadat Respina P1 User Manual

4. Measured parameters (user can choose which measured parameters are displayed in
what configuration)
5. Active alarms
6. The following items are displayed in the left side of the screen. Selecting each item
will load a menu in which you can perform relevant settings.
Modes, Monitoring, Alarms, Config, Maneuver, Activate
7. Respiratory curves (Volume-Time, Flow-Time, Pressure-Time)
8. Respiratory loops (Flow-Volume, Volume-Pressure)
9. Basic parameter settings of current mode
10. Alarms of power supply
11. Alarm review key for quick access to the Event log menu and disabled alarms level 1
and 2
5-6

Monitoring

The user is able to view all the monitoring parameters at once on this page. There is also a
Trend option on this page.
Trend
You can view stored parameters during 72 hours. The Respina P1 ventilator is able to display
trend of three parameters at once. Clicking on label positioned beside each curve will open a
menu in which you can select a parameter to be displayed in the trend.
Monitoring menue
Figure 5-8 M
33