Section 7. Technical Specifications - Saadat Dena User Manual

Section 7. Technical Specifications

CLASSIFICATION
Protection against electroshock
Mode of operation
Harmful Liquid Proof Degree
Method of sterilization and disinfection
Safety of anesthetic mixture
DISPLAY
Display
Resolution
Waveforms
Numeric Parameters
Operation Method
Displayed data
ECG
Input Channel
Standard leads acquired
Sensitivity Selection
Filters
Calibration
Dynamic Range
Leakage Current
CMRR
Time Constant
Frequency Response
Pace
Protection
Standards
Class I, Type CF , defibrillation-proof applied part
Continues operation equipment
Ordinary equipment, (without Liquid Proof)
Refer to chapter 10 for detail.
Not suitable for use in the presence of a flammable
anaesthetic mixture with air or with oxygen or nitrous
oxide.
TFT COLOR, Tuch screen, 10.1''
1024*600
12 Lead ECG
HR
Membrane Keys and Touch
Waveforms, Data & Time, Recording Speed, Sensitivity,
Operation Mode, Filter, HR Value, Message
Simultaneous acquisition of all 12 leads/ Rhythm Lead
I, II, III, aVR, aVF, aVL, V1, V2, V3, V4, V5, V6
2.5, 5, 10, 20 mm/mV
Drift: on or off
HUM: on or off
Low pass: 25, 35, 75, 150 HZ
EMG: on or off
1 mV
±5 mV
< 10 μA
> 98 dB
3.2 sec.
0.05~150 Hz
Detection & Rejection: 0.1~2 ms, ±2~±250 mV
Defibrillator
IEC 60601-2-25
35