4- Operation; Use Of The Ventilator; Standby Key - Saadat Respina P1 User Manual

4- Operation

4-1

Use of the Ventilator

Warning
The ventilator must be operated only by qualified clinicians.
Note:
Perform the system test before connecting the ventilator to the patient.
Turn the ventilator on or off using On/Off key placed on the rear panel.
Check that all cable and tubes are connected correctly and the ventilator is connected to an
appropriate power source.
4-2

Standby Key

By pressing Standby key, you can access the following menu with four options.
Patient Setup : select this option to stop ventilation and load Patient Setup menu. This key is
disable until the ventilator is in ventilation mode.
Standby: select this option to stop ventilation, place the device in standby mode and load the
main screen. Standby is displayed above the screen.
Cancel: select this option to close the menu and access the previous menu. In this condition
ventilation will continue uninterrupted.
Shut down: select this option to shut down the ventilator. This key is disable until the
ventilator is in ventilation mode.
Figure 4-2 Standby menu
24