2. Remove five nuts (A) from the bolt studs.
3. Remove shield panel (B).
4. Remove curtain (C).
Installing Cutterbar Door Curtains
The procedure for installing cutterbar door curtains is the same for both sides.
1. Insert the cutterbar door bolts into the precut curtain
holes (A).
2. Install shield panel (A).
3. Install five nuts (B) onto bolt studs and torque to 23 ft·lbf
(32 N·m).
169820
MAINTENANCE AND SERVICING
162
Figure 4.83: Nuts Securing Shield Panel and
Curtain to Cutterbar Door
Figure 4.84: Curtain Installed onto Bolts
Figure 4.85: Shield Panel Installed with Nuts
Revision A