Table of Contents
Advertisement
General Safety Summary
This document contains information and warnings that must be followed by the user to
ensure safe operation and to keep the instrument in a safe condition. Use of this
equipment in a manner not specified by the manufacturer may impair protection provided
by the equipment. Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid potential hazards, use
this product only as specified.
Safety Precautions
•
Use only as Specified. The product can only be operated under the safe
conditions and positions specified by the manufacturer.
•
Use only within operational environment listed. When powered by a power
adapter, the product can only be used indoors. Do not use this product in or
near a heat source, and the ambient temperature cannot exceed the maximum
temperature in the document or datasheet.
•
Use only accessories compatible with the product. Use only the power
adapter, battery, probes and accessories specified by the manufacturer.
•
Do not damage the insulation protection layer of the product and
accessories. Doing so may cause electric shock.
•
Do not operate with suspected failures. Ensure the power cords and the
probes are in good condition before use. If the power cords or the probes are
damaged, do not use the product.
•
Voltages higher than 30 V RMS, or 42 V peak, or 60 V DC are regarded as
hazardous contact voltages. When working with hazardous contact voltages,
use protective measures to preclude direct contact with the measurement setup:
o
Do not touch exposed connections and components when power is
applied.
o
Use only insulated voltage probes, test leads and adapters.
•
Do not remove the product casing. Removing the cover or any part of the
shell while the product is in operation will expose circuits and components and
may cause personal injury, fire, or damage to the product.
4
T3DSOH1000/ISO User Manual
Advertisement
Table of Contents
