Using The Suv Cable In A Kvm Setup; Using The Suv Cable To Access A Usb Drive In A Kvm Setup - HPE ProLiant XL645d User Manual

Item Component
1 Serial port
2 USB 2.0 Type-A ports (2)
3 iLO service port
4 VGA port
5 SUV connector
1
For trained personnel only
2
These ports do not support USB devices that require a power source greater than 500 mA at 5 V.
3
A USB device connected to the iLO service port is not accessible to the host operating system.

Using the SUV cable in a KVM setup

Procedure
1. Connect the SUV cable to the SUV port.
2. Connect a monitor to the VGA port.
3. Connect a USB mouse to one of the USB ports.
4. Connect a USB keyboard to the other USB port.

Using the SUV cable to access a USB drive in a KVM setup

The USB ports on the SUV cable do not support USB devices that require a power source greater than 500 mA at 5 V.
When accessing this type of USB drives, such as a USB key or a USB optical drive, use a USB hub in a KVM setup.
Function
Connect a null modem serial cable to perform diagnostic procedures.
2
Connect USB devices.
• Connect a FAT32 formatted USB flash drive
Health System log.
• Connect a client system using a supported USB to Ethernet adapter and
access the iLO web interface, remote console, CLI, and iLO RESTful API.
For more information, see the iLO user guide on the HPE website (https://
www.hpe.com/support/ilo-docs).
Connect an analog display device.
Connect to the server SUV port.
1
3
to download the Active
Hardware options installation
52