HPE ProLiant XL645d User Manual page 84

CAUTION: The TPM is keyed to install only in the orientation shown. Any attempt to install the TPM in a
different orientation might result in damage to the TPM or system board.
2. Install the TPM board:
a. Locate the TPM connector on the system board. See the server hood label for the exact location.
b. Align the TPM board with the key on the connector, and then install the TPM board. To seat the board, press the
TPM board firmly into the connector.
3. Install the TPM cover:
a. Align the pins on the cover with the openings on the system board.
b. Press straight down on the middle of the cover until the alignment pins are seated into the holes.
4. Secure the rivets into place by pushing them firmly through the holes in the TPM cover.
Hardware options installation
84