Table of Contents
Advertisement
Hardware options installation
Introduction
Install any hardware options before initializing the server. For options installation information, see the
option documentation. For server-specific information, use the procedures in this section.
If multiple options are being installed, read the installation instructions for all the hardware options to
identify similar steps and streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal
system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
SUV cable option
CAUTION: To avoid equipment damage when removing the SUV cable, press and hold the release
buttons on the SUV cable connector before disconnecting the cable from the SUV port.
Use an SUV cable to perform server administration, configuration, and diagnostic procedures by
connecting video and USB devices directly to the server.
Using an SUV cable for a KVM setup
Procedure
1. Connect the SUV cable to the SUV port.
2. Connect a monitor to the video connector.
3. Connect a USB mouse to the second USB connector.
4. Connect a USB keyboard to the other USB connector.
26
Hardware options installation
Advertisement
Table of Contents
